Veuillez passer au nouveau navigateur Edge, ou utiliser Chrome, Firefox ou Safari, avant de continuer. Le site d'ADI Global Distribution ne prendra pas en charge Internet Explorer après le 12 mars 2021.
Kidde DP721RTA Série Dx700 Aritech Conventional Auto-Reset Multisensor Detector with Relay, White (Détecteur multi-capteurs à réarmement automatique avec relais)
Numéro d'article ADI #:DP721RTA Modèle #: DP721RTA Nom: Kidde DP721RTA Dx700 Series Aritech Conventional Auto-Reset Multisensor Detector with Relay, White
Sale Type:
Nouveau
Présentation du produit
Général Informations
All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED. The 700 Series photoelectric detectors include a sensitivity test mode that may be activated by simply holding a magnet near the detector's test point. This initiates a self-diagnostic routine and provides visual indication if service is required. This test mode allows field sensitivity testing without the requirement for external meters or test gas. The photoelectric sensing chamber unclips from the detector for easy field cleaning and service. During regular maintenance the detector cover can be removed, the optical chamber removed and replaced by a low cost, new chamber. On power up the detector auto-calibrates and returns to normal operating mode without any further intervention.For a truly fast and broad-spectrum detection the DP721RTA offers both optical and heat sensors. The interaction of both the smoke and heat algorithms ensure a quick response to both flaming and smouldering fires. All bases are provided with an integral locking tab for extra security if required. Bases are equipped with a shorting bar between IN and OUT that opens when the head is installed and that may be manually restored when removing the head. This simplifies cable continuity testing. The DP721RTA must not be used in applications requiring compliance with commercial or residential fire standards such as EN54-5/EN54-7/EN54-29/CEA4021/EN14604. Always ensure compliance with local codes and standards.
Caractéristiques Principales
Automatic reset when event clears
Automatic self diagnostics with dynamic full detector and sensitivity test
High false alarm immunity with floating background with drift compensation
Separate fire and fault LEDs for unambiguous alarm reporting
Wide operating voltage for use on most conventional systems
Polarity insensitive for carefree installation
COM/NO/NC contacts for easy supervision on any system
Manual self diagnostic with visual sensitivity indication
Field exchangeable and disposable optical chamber
Up to 80 m² coverage
Informatie
Categorie : Détecteurs de fumée et de chaleur, Incendie, Produits, Systèmes de détection incendie
Spécifications
Caractéristiques générales
ADI Référence du produit
DP721RTA
Code fabricant
DP721RTA
Fabricant
Carrier
Marque
Kidde
Modèle de produit
DP721RTA
Nom de produit
Aritech Dx700 Series conventional auto-reset multisensor detector with relay
